| 故障排查: |
Check the following:
The 1st BTR Contact/Retract Sensor for improper installation.
The 1st BTR Contact/Retract Sensor (DC330 [094-200]) for operation failure. (PL 3.1, PL 3.2)
The 1st BTR Contact/Retract Clutch (DC330 [094-008/009] (Retract/Contact)) for operation failure. (PL 3.1, PL 3.2)
NOTE
During the 1st BTR Contact/Retract operation, check whether the Fusing Unit Drive Motor is also rotating. If it is not rotating, check the 1st BTR Contact/Retract Gear for blockage and damage.
The IBT Belt Assembly for mechanical loading or damage If no problem is found, replace the Motor Drive PWB. (PL 18.2, PL 18.5) |
