| 故障排查: |
Cause/Action
1. Turn the power OFF and ON.
2. Turn OFF the power and disconnect the power plug. Check the IH Rear Thermistor for open circuit.
3. Check the connection between the Motor Drive PWB J420 and the Drawer Connector J600 for open circuit, short circuit, and poor contact.
4. If no problem is found, replace the following parts in sequence. However, each time a parts is replaced, check whether the Fail is still occurring and return the part if it has no problems.
Fusing Unit (PL 7.1)
Coil Assembly (PL 7.1)
Motor Drive PWB (PL 18.2, PL 18.5) |
