Description
The DADF detected a document that is smaller than the minimum transportable size.
Low/Mid-M model: Shorter than 85 mm (Simplex Mode)
Mid H/High model: Shorter than 135 mm (Simplex Mode)
故障排查:
Check the size of the document that was fed by the user. If it is within the permitted length for DADF transport, check the following:
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 54.9)
The DADF Feed In Sensor 1/2 (DC330 [005-204]) for operation failure. (PL 54.8)
The DADF Feed Out Sensor (DC330 [005-205]) for operation failure. (PL 54.9)
If no problem is found, replace the DADF PWB. (PL 54.3)
Cause/Action [Low/Mid-M model]
Check the size of the document that was fed by the user. If it is within the permitted length for
DADF transport, check the following:
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 57.5)
If no problem is found, replace the DADF PWB. (PL 57.4)
