(Mid-H/High model) DADF Simplex/Side 1 Regi Sensor On Jam
故障原因:
Description
After the DADF Pre Regi Sensor ON, the DADF Regi Sensor did not turn ON within the specified time.
DADF Regi Sensor turned ON before the DADF Pre Regi Sensor turned ON.
故障排查:
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the surface of the Takeaway Roll and Pre Regi Roll.
Wear on the surface of the Takeaway Roll and Pre Regi Roll.
The DADF Regi Sensor (DC330 [005-110]) for operation failure. (PL 54.9)
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 54.9)
The DADF Pre Regi Motor (DC330 [005-013]) for operation failure. (PL 54.10)
The DADF T/A Clutch (DC330 [005-087]) for operation failure. (PL 54.10)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 54.3)
